Tuesday, September 30, 2008

How to Make an Adjustable Chef's Hat for Kids



This is a tutorial for the third and last part of the Kitchen Ensemble 
playwear - the chef's hat. No pleats in the crown of this one, though - 
just simple gathers. The headband is made adjustable with velcro 
straps. This is not an easy project to sew, and even harder to explain. 
I apologize for making the process more complex 
than it might have needed to be.

You will need:
  • Half a yard of fabric that has some weight- maybe something between quilting cotton and home decor fabric, cut into
        -- A circle 17" in diameter (shown folded in half in the picture)
        -- Two rectangles 23" x 4"
  • A piece of fusible interfacing 22" x 3" 
  • 2 pieces of velcro 2.5" long (loop)
  • 1 piece of velcro 2.5" long (hook)
  • 4" of 1/4" bias tape in a color that matches the fabric
  • Measuring tape

Part I
The Headband

Step 1
  • Place the interfacing shiny side down on the wrong side of one of the rectangles so that there is 1/2" border of fabric all around the interfacing.
  • Run a hot iron over the interfacing, bonding it to the fabric.

Step 2
  • Turn the rectangle over and place the two pieces of loop velcro so that 
-- they are on the right side of the fabric
-- they are parallel to the long side of the rectangle
-- they are 3/4" apart and equidistant from either of the long sides of the rectangle
-- their ends are 3/4" from one short side  of the rectangle

In the picture below, this is the top rectangle.
  • Sew around the edge of the velcro pieces to attach them to the fabric.

Step 3
  • Place the other fabric rectangle right side up.
  • Place the piece of hook velcro parallel to one short side of this second rectangle. Position it 3/4" from the short edge and center it vertically. 
  • Pin and sew the edges to attach it to the fabric. 
In the picture below, this is the lower rectangle.



Step 4
  • Lay it aside (hurrah).

Part II 
The Crown
You will be working entirely on the 17" fabric circle now.

Step 5
  • Take the 4" bit of bias tape and sew it onto the circumference of the circle like you would attach bias tape to any raw edge. It does not matter which section of the circumference you pick. This will be the part of the circumference that will be eventually be exposed within the adjustable region of the headband, and you want it to be finished rather than fraying.


Step 6
  • Set your stitch length to the longest possible (6 on my machine) and sew one line of stitches 1/8" from the edge and all round the circumference except where the bias tape is. In other words, start sewing just next to where the bias tape ends, and go round till you reach the other end of the bias tape and stop.
  • Leave  at least 4" of thread trailing from the bobbin and the needle when you cut the threads. You will need this length of thread for gathering the fabric later.
  • Sew a second line of stitches about 1/4" from the first (and further in from the edge) all around the circle, again avoiding the bias tape. Again leave 4" of trailing thread when you cut.
  • Adjust the stitch length back to normal.

The picture below shows a section of the circumference with the two lines of stitching.

Step 7
  • With one hand, take either the upper or lower threads from one end of both lines of stitching and pull gently, while gathering the fabric with the other hand so that the edge of the circle begins to pucker and curl inwards. Work till you have gathered the fabric evenly around the circumference - the section with the bias tape will alone remain ungathered. It might help to do half the circle at a time, pulling the threads from both ends of the double line of stitching to gather the whole circle.

  • The aim of this step is to turn the flat circle of fabric into this shower cap-looking thing:
  • You can see the long trailing threads on either side of the bias tape section where they've been pulled to gather the fabric.

Step 8
  • Measure a section on the bias tape that is 2" long as shown. Mark the boundaries of this 2" section. Try to make it as centralized as possible i.e. with about 1" on each side of the marks (shown in red).

Step 9
Because this crown (aka shower cap) needs to fit the headband (22" long) we sewed in the earlier steps, we need the circumference of the gathered circle to be 22". 
  • So with the measuring tape, adjust the gathers so that the circumference is 22" around from one red mark to the other. Pull the long trailing threads and gather more if it is too big, or loosen the gathers if it is too small. The picture below hopefully helps illustrate what is needed:

Step 10
So now you have this shower cap thing that has a 24" opening: 22" of it is gathered fabric, and 2" of it is a bias-tape covered straight edge, right?

  • Knot the trailing threads (the ones you pulled to gather) in such a way that the gathers can no longer be loosened. You want the opening to stay 24".

The crown is now finished!

Part III
Attaching the crown to the headband
This part is fast but could be confusing. This is a good time to make a cup of strong tea (or coffee) and wash it down with vast quantities of high quality dark chocolate.

You are going to sandwich the crown between the two rectangles that form the headband. The important thing to remember (and which will save much gnashing of teeth later) is that the velcro ends have to be opposite. Perhaps the picture below might help explain: ignoring the pins - they are there to keep the fabric from separating inappropriately - one rectangle (the one below) has velcro at its end and the other (peeled back) does not.


Grr.. dare we continue?
OK, here goes:

Step 11
  • Take one rectangle with the interfacing and, beginning with the end with the velcro, place against the outside of the crown as shown so that
-- the right side of the rectangle is facing the crown
-- its long edge is lined up with the gathered edge of the crown
-- one red mark on the bias tape is 1/2" from the short edge of the rectangle (the blue pin is 1/2" from the edge of the rectangle)




  • Pin all the way around the edge of the crown so that the other short edge of the rectangle ends 1/2" beyond the other red mark on the bias tape.

Step 12
  • Take the other rectangle and, beginning with the end without the velcro, place it against the inside of the crown so that
-- the right side of the rectangle is facing the inside of the crown
-- its long edge is lined up with the gathered edge of the crown and the edge of other rectangle
-- the same red mark that you began with the first rectangle is 1/2" from this short edge of the second rectangle. In other words, the two rectangles are lined up but one is outside the crown and the other is inside.
  • Pin all the way around the crown.

The picture below shows a close up of the three sandwiched layers: inner rectangle, gathered crown, outer rectangle.
Top view

View of top and side, showing the interfacing


Step 13
  • Sew a line of stitches 1/2" from this edge all along the length of the rectangle, stopping 1/2" from either end.
  • Remove the pins and fold the rectangles down so that their right sides face out. The hat should look something like this: 
You should have 
  • a crown that has all its fraying edges tucked into the headband
  • the headband going all the way around the crown except for the 2" section that has the bias tape
  • the headband that has velcro on opposite ends
  • the headband that has one long side sewn and the other long side and both short sides unsewn.

So far, so good.

Step 14
  • In this step, you are going to sew up the three unsewn sides of the headband by folding a 1/2" hem all round and tucking the raw edges of the fold between the two rectangles. 
  • Fold in the corners as neatly as you can.
  • Top stitch all round these three sides. The picture below shows the edges folded in 1/2" and stitched over.


The hat is finished, believe it or not -

with the adjustable opening open

and closed


and worn by a 4-year old

42 comments:

  1. Very clear instructions! You didn't make it more complex, what. Really like how you made the adjustable part so simple but effective.

    ReplyDelete
  2. I am so done with tutorials for now. It's nice to be teacher again but all that photo-taking does detract from the fun of actually making. Maybe more tutorials (and simpler) later in the year but for now, there are Christmas projects to start! Can't wait!

    ReplyDelete
  3. Thank-you so much for the great pictures and instructions. This is just what I was looking for. I'm getting my two little girls a big play kitchen for Christmas and I wanted to make them matching aprons and chef hats. I had no idea where to start with the hat, so I'm so glad I found this post. I tried it out tonight and the little hat turned out perfectly, thanks to you.

    ReplyDelete
  4. Thanks so much for posting this. My 11 year old daughter and I made this today for her Chef Halloween costume. It is not as perfect looking as yours, but it turned out great and my daughter loves it. Your instructions are very good and easy to follow. The pictures are a helpful bonus. Thanks for sharing your skills and creativity.

    Happy Halloween!

    ReplyDelete
  5. This is on my list of things to make for my kids and for our friends, thankyou! Chele x

    ReplyDelete
  6. I don't know how I found this tutorial now - but I'm very glad I did. I made this hat last night for a birthday present for my son's kinder friend. Now I don't want to give it away! Thankyou - I can see this becoming a birthday staple - especially for little boys. And I thought your instructions were very clear and easy to follow. Thanks again.

    ReplyDelete
  7. I made this for my 3 year old niece. Thanks so much for the instructions - they were perfect!!

    http://lifeonwillowdale.blogspot.com/2010/07/chefs-hat.html

    ReplyDelete
  8. Thanks for this wonderful tutorial. My DD had to dress up as a "community member" for her talk at school. She chose to be a baker - along came your tutorial to the rescue!

    ReplyDelete
  9. Thanks for the instructions. You obviously worked very hard on this tutorial. I hope you get some satisfaction that years later people are still finding it and using it to make their own kids something fun. My 6yo chose to be a chef for Halloween this year and this is PERFECT and simple. Thanks again!

    ReplyDelete
  10. Thanks for all your hard work in making this tutorial. I hope you find satisfaction in that, years later, people are still benefiting from your effort. My 6yo wants to be a chef for Halloween and this is PERFECT and you've made it so simple. Thanks!

    ReplyDelete
  11. Thanks to your so clear instructions I have made a beautiful chef's hat for my grand-daughter. Thank you very much!

    ReplyDelete
  12. I found your pleated skirt tutorial which I might be adventurous enough to try in the morning because I came back from the mall today without anything satisfactory for my daughter to wear.
    Finding this hat tutorial was an added bonus! My son just mentioned how he'd like a chef's hat. Just in time for Christmas giving! Thanks again!

    ReplyDelete
  13. Perfect!!! A friend just ordered 4 apron/chef hat sets. Abs...I've never made a chef hat. Lol. Thanks for the great tutorial!!!

    ReplyDelete
  14. thanks a lot for this tutorial !
    here's my chefs hat :
    http://laraignee-fauchee.blogspot.com/2011/03/just-in-time.html

    ReplyDelete
  15. Bonjour!!

    J'ai trouvé ici les explications qui me fallait pour réaliser une toque et un tablier pour mon neveu.
    Merci!!
    j'ai expliqué en français comment le faire sur mon blog, ici:
    http://creationsetbidouilles.over-blog.com/

    ReplyDelete
  16. Awesome and very clear tutorial! My daughter wants to be a chef for Halloween and this hat will be perfect! Thank you for taking the time to post it!

    ReplyDelete
  17. Hey, Thanks for posting this lucid tutorial. My 9 year old daughter's "Fun-in-the-kitchen" birthday party would not have been complete without this. We made 25 of these chef hats for all the invitees; and the kids loved taking this as their return gift.
    -Awanish

    ReplyDelete
  18. Do you think this could fit an adult too?

    ReplyDelete
  19. @Awanish
    Wow- 25! What an awesome party it must have been! Am glad the tutorial was a help for you!

    ReplyDelete
  20. Hi, I just made the first of three for my two granddaughters and my daughter. Good thing we measured my granddaughter's head or it wouldn't have fit, she has a big head! It shouldn't be hard to make the band bigger for hers. Thanks for your directions and Merry Christmas to you and yours!

    ReplyDelete
  21. @duhmom
    duhmom: thank you! And you're right about the size - I don't think that pattern would fit my daughters' heads now (they're 7, 5 and 3). It's even small for the 3-year old. I haven't made another hat since that time when I made the pattern. Am glad you figured out the right size for your granddaughters. Merry Christmas to you, too!

    ReplyDelete
  22. Very good! Just a tip to everyone, on Step 14 when you sew the three unsewen sides together, go and iron the pieces in so they fold. It makes it a million times easier to sew it!

    ReplyDelete
  23. Four years later and it is still beneficial. This is great! Thanks for pics and instruction. It helps me see exactly what you were describing. I also appreciate the feed back from other people. Can't wait to check out more on your cite.

    ReplyDelete
  24. I love both your hat and apron pattern. So far I have made 5 aprons and 2 chef's hats. I have 1 more kids apron to make. And I plan on adjusting both patterns to be adult sizes so both my kids and I can wear our chef's attire while creating in the kitchen.

    the ones I have made so far are here...http://notyournormalsteam.wordpress.com/2012/10/30/super-chef-cooking-dinner-and-fighting-crime/

    Thanks so much for the tutorial. I love your creativity.

    ReplyDelete
  25. Grata, estava a procura.. pois peguei encomenda desta fofura.. bjs

    ReplyDelete
  26. Thanks so much for the tutorial. My apron and hat for my 4 year old has turned out perfectly. Will return for more inspirations and advice.:)

    ReplyDelete
  27. Hey, thanks for this! I want to make my niece and nephews chefs hats for christmas, and I was wondering how I would make it fit their heads properly, but the adjustable part makes so much sense.

    ReplyDelete
  28. Thank you SO much for the awesome pics and instructions for the adjustable chefs hat!
    This is so much help!

    Thanks again!!

    ReplyDelete
  29. Hello, your instructions are really good, but I've a question: What should the size be, if I make the Chef's hat for an adult?

    ReplyDelete
  30. thanks for the awesome tutorial.
    Best regards
    DeWiwi

    ReplyDelete
  31. Great tutorial. I made this today using "Frozen" fabric. I'd also made an apron. It will make a lovely gift for a very special little girl. Thank you

    ReplyDelete
  32. Thanks for the great tutorial. Perfect for my grandson

    ReplyDelete
  33. Thank you for the tutorial. With the help of your tutorial and some changes to the size I made one for a friends daughter who needed it for the Swedish Lucia :)

    ReplyDelete
  34. Great tutorial! I cant explain how much i love pieces with well done finishes, this one is just perfect! Do you think that this pattern is suitable for an eight years old kid, despite the adjustable feature? Best regards, here, from Portugal :)

    ReplyDelete
    Replies
    1. Marta: I daren't say yes, because it is a small hat and I think my kid was 3? when I made it. I think if you made the band longer and the circular crown correspondingly bigger, you'd be able to make an overall bigger hat.

      Delete
  35. I made 6 for special people of mine at Christmas, the first two didn't work great. I found when I stopped pinning the top all the way around and when I stopped tying off the ends (around the circle at 22 inches) and gave myself a little more flexibility with the gathers it worked great. I also made them a bit bigger so that they would fit my kids and me, now we can all dress as chefs together in the kitchen! I found the instructions were great and the pictures very helpful, thanks so much for the tutorial!

    ReplyDelete
  36. This is incredibly helpful and so detailed. I am a blogger and I know how much time and effort it takes to write things out and take photos and load them, so I really appreciate the effort that has gone into this post. Fantastic!

    ReplyDelete
  37. Thank you very much for this incredibly detailed and meticulous tutorial! I just finished sewing an adult-size version for my dad to wear while he makes pies and croissants. I made a few mistakes due to not reading your instructions properly and trying to freestyle the sizing-up, but I think it should fit him. I would never have figured out how to do this myself, so thank you!

    ReplyDelete
  38. Fabulous tutorial!!! I haven't tried it, yet, but feel confident that your clear instructions will make it a breeze! Thank you so very much ♥️

    ReplyDelete
  39. Thanks so much for sharing this. Your instructions are so clear.

    ReplyDelete
  40. Hello, I have just made this for my grandson. It is so cute, I can’t wait to see it on. Your instructions are very clear with lots of detail, making it easy to make. Thank you so much for sharing.

    ReplyDelete
  41. I just made two of these, and they turned out great! Your instructions and pictures are very clear. Thanks a bunch for posting this.

    ReplyDelete

Thank you for talking to me! If you have a question, I might reply to it here in the comments or in an email.