Wednesday, December 17, 2008

Dress-up Box: Masks

Three masks for the Box. 
They are simple and relatively quick to make. 
So here is a tutorial.

You will need (for each mask)
  • Felt for the front of the mask
  • Fleece for the back
  • Some soft material for the elastic casing
  • Elastic -mine was about 14" long and 3/8" wide
  • Fusible interfacing
Draw out a pattern or use mine here:



Step 1
  • Cut the front piece (felt) to size, but do not cut the eyeholes out.
  • Cut the piece of interfacing to size and iron it onto the felt.
  • Cut the back piece (fleece) larger than the felt piece.
  • If there are any additional felt layers, cut those out to size and cut the eyeholes out.


The thing to remember is that the mask will have many layers. Cut out the eyeholes only in the topmost layer. You can cut the lower layer eyeholes later - it will be easier than trying to align eyeholes of different layers in the sewing process. In the picture below, I did not cut the eyeholes out of the green/teal mask yet because the two halves are held together only by the interfacing and I planned to secure them together with stitching first.


Step 2
Construct the elastic casing.

Here I was experimenting with various fabrics: green chiffon, black satin cut on the straight, and pink satin cut on the bias.
Essentially you need a rectangle about 18" long and 1.5" wide. Fold in half lengthwise, sew a 1/4" seam allowance along the length and turn turn inside out. Stuff the elastic in with a small safety pin. Secure the elastic inside the tube at both ends with stitching.

You should get a wiggly tube like this:
unless, like me, you cut the rectangle on the bias, in which case you would get a weird smooth tube like this:

Working on the white and pink masquerade mask:


Step 3
  • Sew the white felt and fleece pieces together.
  • Trim the excess fleece away around the edge.

Step 4
  • Attach the elastic casing to both ends of the mask from the back. Attach the ends about 1" in from the edge of the mask. To decide how long the elastic case should be, you will need to measure around your child's head where the mask will be worn and get the best fit.

A close-up of the attachment point.


Step 5
  • Position the pink top layer on the front and top-stitch around the edge of the pink layer. If you were careful in the earlier step (I wasn't), the pink layer should hide the stitching of the attachment point.


Step 6
Top-stitch on the pink layer around the eyeholes.



Step 7
  • Cut out the eyeholes in the lower layers.
  • Trim more of the fleece away if you did a shoddy job of it earlier (like I did).


Step 8
Embellish.


Step 9
  • Working on the split green/teal mask, begin by running a row of zigzag stitches along the join between the two colors (scroll down to see these stitches in the picture in Step 11). 
  • Then embellish with embroidery. 
  • Cut out the eyeholes.


Step 10
Attach the elastic casing to just the back of the fleece layer. This is to avoid the stitching of the attachment point from being visible in the front of the mask. As with the white mask, attach the ends about 1" in from the edge of the mask.

Step 11
  • Position the felt layer above the fleece layer and top-stitch along the edge and around the eyeholes as with the white mask. 
  • Cut out the eyeholes in the fleece layer and trim away the excess fleece.

The completed mask


Step 12
With the superhero mask, position all the layers as shown and top-stitch around the edge of the black felt, then around the eyeholes.


Step 13
  • Trim away the excess fleece just around the ends of the mask (where the elastic case will be attached), then sandwich the end of the elastic case between the red felt and fleece layers. 
  • Top stitch around the edge of the red felt, catching the elastic case ends on both attachment points as you stitch.
The picture on the left shows how the elastic case is attached 
in the superhero mask. This allows the mask to wrap around 
the wearer's face fully. It is different from the way the casing 
is attached in the other two masks (other picture), because 
we don't want the elastic to pull the corners of those 
masks back when they are worn. 



The completed superhero mask.

I did think of sewing a superhero cape also, but there already 
are big pieces of cape-like fabric in the Box that the girls can 
drape over their shoulders. But if they want a cape that fastens 
around their necks, I will work on one after Christmas. 
Here's a great tutorial and pattern for that.

Friday, December 12, 2008

Silhouette Pictures

Taking an intermission from the Dress-Up Box this week. 
With Christmas so soon, I really have no business being 
sidetracked but my sewing machine and I are wrestling 
with something especially challenging now (much 
gnashing of teeth) which makes me naturally want to 
start a hundred new projects simultaneously.

Mum and Dad are celebrating their 40th wedding anniversary 
this Sunday so I made some silhouette pictures of the girls for 
them. The girls helped by posing (Kate was not cooperative) 
so I could take photos of their profiles.




I think there is something rather Alfred Hitchcock-ish 
about Kate's but I am assuming it's something all babies 
share. She looks better in real life!

Note: see sidebar under "Projects I'd Like to Do Someday" for a link to one of many tutorials on this.


Felt Board

More procrastinating - made a couple of felt boards last week. 
One for a friend and one for the girls. Thought of waiting till 
Christmas to present it to Emily and Jenna but they were 
restless last weekend and needed a distraction. 
So they got an early Christmas gift.


There are many different versions of felt boards to make 
- some are plywood, some felt mounted in a wall frame, 
some with no backing so they can be rolled up like mats, 
and some even on pizza boxes (for travel). Ingenious! 
Was too busy to make a tutorial, especially since there are 
so many excellent ones on blogs everywhere, 
but here's a quick description of what I did:

I used a 20" x 30" foam core board (1/4" thick) and sprayed one side with spray-on adhesive. Then I stuck on felt and left a 2" border to wrap around the other side. I sprayed adhesive on the other side, pressed the border down flat, then sprayed more adhesive over everything to attach a second color of felt, making a double sided board. This second piece of felt was bigger than the board, so I trimmed away the excess when it was dry. The edges and corners took a little UHU glue to ensure they really stayed stuck down.

So this board has a daytime side

and a night-time side.

Emily wanted to play Sunday School so here is Jonah 
getting swallowed by a big fish, watched by a relieved 
sailor on the boat he just left.

and here is the felt version of 
Ms. Potato Head, Cyclops Princess.

If you make this and want ideas for felt cutouts, 
try the felt board posts at 

Outgoing Mail

We spent the morning today visiting the home of two friends 
and their little boys. They had some gifts for the girls and the 
mum, a very crafty person herself, made these delightful 
gift tags with her sons. Cute, cute, cute.


We brought her a felt board identical to the one the girls have. 
We assumed she wasn't a fabric hoarder like I am and supplied 
her with multicolored felt sheets and the land- and sea-scapes 
for future felt board activities. 


We also brought along another mail-drop cardboard mailbox 
and two small personal mailboxes for her boys. I enjoyed the 
construction process of these especially because Emily was 
with me making her own cardboard thing (a house). I had to 
interrupt my own project numerous times to cut tape, help 
her hold the walls of her house in place and squeeze glue for 
her but it was so much fun to watch her make something 
out of cardboard in the same manic way her mom does. 


Along with the cardboard stuff, we supplied 
two mailbags for the little mailmen

and a mail kit containing self-inking stamps, envelopes, 
index cards ("postcards"), square stickers ("stamps") and 
labels ("address labels"). Emily was very enthusiastic about 
demonstrating how everything worked 
and Kate ate some of the stickers.


Updated 2019 to add: in response to many requests for instructions to make the cardboard mailchute, there is now a 2-in-1 pattern you can purchase here. Included are instructions to make that mailchute as well as a fabric mailbag for mail carrier/post office pretend play!


Sunday, December 7, 2008

Dress-up Box- Things for Little Royal Heads

So a little girl has to have some princess stuff to dress up
in. Mothers I know tell me that almost all little girls go
through a Princess phase. Since I have three little girls,
I imagine we're going to be hosting royal balls and parties
for a long, long time. Emily has a few Disney princess
dress-up items in her current stash and a plastic tiara from
a neighbor friend. Everything else she improvises.


So I sewed her some things to wear on her head
to help her imagination along:

A medieval princess hat

a felt tiara

and a bunch of felt crowns.

They have a short bit of elastic at the back to accommodate
both girls' heads. The elastic is encased in a variety of fabrics
- Thai silk, velour, satin - anything royal-ish.
The tiara is similarly adjustable.



These Waldorf-style felt crowns are all over the internet
- I used the pattern from this tutorial but modified it so
there'd be more crown and less elastic.


Jenna was kind enough to model the crowns for me one
day when Emily was in preschool. It is risky not to be able
to try the finished product on the girls to be sure of the fit.
But they sat nicely on Jenna's head with a little room to
spare so I think they'll be fine for Emily, too.

But I digress.

Unlike all those other Waldorf-style felt crowns on
the internet, these are not all 100% wool felt. I used what I
had at home and some (the felt my grandmother left me)
were wool, and the rest weren't. Yes, I could tell the
difference, particularly in the quality of the top-stitching:
But otherwise even the regular felt worked quite well.


I made extras for Christmas gifts, and not just for girls,
so some had buttons


and others had gems and trim.

The buttons and gems had to be hand-sewn onto
the finished crowns, so I did that at night, curled up
on the sofa while the husband read the papers.

I made nine in all, some to keep and some to give.




I went a little mad with the colors- can you tell?

Saturday, December 6, 2008

Dress-up Box - Abracadabra!

A magician's top hat, wand and cloak.

The wand is a wooden dowel painted
with acrylic paint and varnish.

The top hat is double-layered felt
stiffened with interfacing.

It also has a secret compartment
- a very-obviously false bottom

so small magicians can pull all sorts of things out of it

and hide little friends inside that might want to make
grand appearances during their act

I think some little magicians might also enjoy doing little
tricks with their playsilks, but if they want something
with a little more glitz, there are these one-yard pieces of
metallic-sheen fabric. I thought of sewing one into a cloak
but that would leave less to the imagination, no?