Friday, February 8, 2013

Make A Bag Chapter 10: Wrapped Tote



The Wrapped Tote is another popular structure in bags. By simply changing the shape of the side pieces to circles, tear-drops or triangles, this bag takes on the more familiar forms of duffels, clutch purses and handbags.

We start with the old volume-and-dimensions diagram

and draft our pattern - two side pieces and a big piece that wraps around their edges to become the front, base and back,

like so:

To assemble, the main piece is sewn to one side piece after the other.

We picked a bowtie theme for our Wrapped Tote, making the fastener and straps in that design. 

The tie was made in two halves 

that spanned the entire width of the bag opening.

The straps are closed-ended corded rouleau straps, tied to fabric anchors on either side of the bag,

like so:

The lining is an identical bag edge-stitched to the outer bag around their opening, enclosing the ties in the seam in the process.

The straps are tied on,

and the bow tied over the opening

to complete the bag.

It can be used either face out, even though the strap anchors are sewn only to the outer layer.

Here follows another variation of the Wrapped Tote - the messenger bag/satchel,



which is simply the Wrapped Tote with a flap. The pattern is exactly the same as the plain old Wrapped Tote, extended into a top+flap portion.

The fabric layout (the side pieces are overlapping the main grey piece only to squeeze everything into the camera frame): 

I added piping to the seams of this bag, just to make it a bit more interesting.


The lining is an identical bag-with-flap. When assembling the layers, however, we are not going to edgestitch them around their openings the way we did with the earlier Wrapped Tote. We are instead going to sew the layers with their RS together to create a real seam to enclose the piping all around the edge of the flap and then turn the whole bag RS out through a hole in the lining i.e. the  TWBRSOTAHITL method. The adjustable strap is open at one end and closed at the other 

and inserted into the side seams when the layers are sewn together. 

More detailed process-instructions for making a messenger bag can be found in this earlier post. I left almost the entire width of the front edge of the bag unsewn for turning out:

This opening will be edge-stitched closed when the bag has been turned RS out.

Here is the finished bag, either face out:


The piping adds a bit of color to the otherwise plain grey flap in the outer face

and provides structure to the fabric (i.e. acts like a natural frame because of its rigidity). There is no need to topstitch around the edge of the flap when there is piping present; you may choose to still do so if you like the look of the extra lines of stitching. 

Here are a few other bags I've made using the Wrapped Tote structure -

a diaper bag

Emily's duffle:

and pencil cases!









Wednesday, February 6, 2013

Make A Bag Chapter 9: Gusseted Tote


The Gusseted Tote today.


This is a very popular structure in bags because it's so versatile. It gets its thickness/depth from a strip of material, commonly called a gusset, running around its sides and base. Sometimes the gusset is a single continuous piece of fabric and sometimes it's a strip made by joining the base and sides (with possibly side pockets added) end-to-end. 


Let's jump right into the pattern. 
Keeping in mind the volume and dimensions,

the pattern is two flat front-and-back pieces and the gusset,


which translate to fabric thus:

To assemble, you sew one long edge of the gusset to the Front piece. Here's a photo of another random bag in progress showing this.

Then you sew the other long edge of the gusset to the Back piece.

You can keep the corners square if you like. I often round them off a little bit.

For this bag, I made a closed-ended strap that buttons onto tab pieces sewn into the side panels.

Bags with this single-strap design often gape open at their opening (due to some law of Physics involving forces) so it's almost always necessary to close that opening somehow - with a magnetic snap, a zipper, a tie or a flap, for instance. If the flap were of the same width as the bag, this would be a messenger bag. I picked a narrower flap that buttons on. 

I personally think this flap is a bit too long but it is a very gapey bag, after all, thanks to the completely vertical sides. I didn't want to change the shape of the bag too much in this tutorial so that you could see the 6" x 7" x 3" dimensions of the finished bag more clearly. However, if I were to do this differently, I'd taper the sides in towards to top, resulting in a less gapey opening, which would then need a shorter (and more proportional-looking) flap. Something like this:

The lining is just another, identical bag sewn in a different fabric and edge-stitched together to the outer bag around their openings.

And apart from the strap buttoning on in an outside-in way, this could be a reversible bag.

Here are more examples of Gusseted Bags:

Backpacks are Gusseted-all-around Bags.

Instead of leaving a top opening, the gusset is sewn around the entire bag and a zipper inserted along one of those gusset seams (or in the middle of the top of the gusset) to make an opening.

This suitcase-style bag is also a Gusseted-all-around Bag.

Remember how I said the Gusseted Bag structure is really versatile? See - I even use it in cardboard:

The all-around gusset seam is a natural place to make an opening to the bag. You could insert a zipper, for instance, as in the case of backpacks. You could also turn the bag on its side and make one of the main faces the lid, as in the case of these cardboard suitcases. Did anyone notice that in this orientation, the Gusseted-all-around Bag takes on the Bucket Tote structure? Sneaky!